Congratulations on owning your very own MORNING Machine! Before using your Morning Machine, please read through these important setup steps and safety notes.
Before You Begin
- Check your voltage. Make sure your home power supply matches the voltage marked on the MORNING Machine box and rating plate.
- Keep the original packaging. This will come in handy if you need to transport the Morning Machine in the future.
- Water residue is normal. A small amount of water may be present in the machine—this is from factory testing.
- Handle with care. The MORNING Machine is an electrical appliance. Please follow all safety precautions to avoid injury or damage.
- Note about rubber feet. For the first batch of machines, we’ve removed two rubber feet for better brewing stability—this is intentional.
Setup Instructions
1. Choose a Location
Place your MORNING Machine on a stable, flat surface, such as a kitchen countertop.
2. Rinse Components
Remove the following parts and give them a quick rinse:
- Water tank
- Used capsule container
- Drip base
If the machine hasn't been used for a while, we recommend a more thorough rinse.
3. Fill the Water Tank
- Use fresh, filtered water only.
- Fill up to the MAX line (maximum capacity: 850ml).
- Do not operate the machine with an empty tank.
4. Reattach the Water Tank
Slide the water tank back into its base. You should feel it lock securely into place.
5. Power Up
Plug the MORNING Machine into your wall outlet. It will automatically switch on.
Next Steps
-
Pair with the MORNING Mobile App.
Follow our guide on Pairing with the Morning App to connect your machine.
-
Prime the Machine.
If this is your first time using the MORNING Machine, or if it hasn’t been used in a while, prime the machine before brewing. Learn how in our Priming Guide.
Should you require further assistance, please reach out to our Customer Care Team at hello@drinkmorning.com.
Comments
0 comments
Article is closed for comments.